Incorrect RAM Seating
RAM that is not fully clicked into its slot causes a no-POST failure — the PC powers on but never reaches the BIOS. Diagnosing it without experience wastes hours.
Professional PC & Gaming PC Assembly
You Pick the Parts. We Build the Machine.
Building your own PC sounds straightforward — until it isn’t. One wrong seating, one misconfigured BIOS, one overlooked standoff, and you’re troubleshooting instead of gaming.
Choose your components on PCPartPicker and submit your list for a quote. Once approved, order the parts to your home, drop them off at our shop, and we handle the build from there. Professional assembly, full cable management, stress testing, and Windows installation included.
- Professional assembly and cable management
- Full stress test before pickup
- Windows installation included
- Typically ready in 2–3 business days
Request a Build Quote
Or call 724-863-1989
Assembly service only — customers supply all parts.
Expert assembly for your dream build.
Why Professional Assembly Matters
These are not hypotheticals — they are the most common problems we see come through the door from amateur builds.
CPU Cooler Errors
Too much thermal paste causes overflow onto the socket; too little leads to overheating. An unlocked cooler mount causes the same problem and is easy to miss on first install.
Standoff & Motherboard Shorts
Missing or misplaced brass standoffs allow the motherboard to contact the case directly. The moment power is applied, the board can short — potentially destroying it instantly.
Poor Cable Management
Cables routed across fans and heatsinks restrict airflow and trap heat. Over time this raises component temperatures and shortens the life of the entire system.
BIOS Left Unconfigured
New builds almost always need XMP or EXPO enabled to run RAM at its rated speed, and boot order set correctly. Skipping these steps leaves real performance on the table.
No Stress Testing
Putting a PC under load for the first time without stress testing can expose instability issues — bad RAM, cooling problems, power delivery — that only show up under sustained use.
Bent CPU Pins
A CPU dropped into its socket at the wrong angle bends the pins in the socket — and bent pins mean a dead board. This is one of the most expensive assembly mistakes we see, and it is almost always avoidable with proper technique.
Incorrect Front Panel Wiring
Motherboard front panel headers carry live voltage. Wiring power, reset, and LED connectors to the wrong pins routes current where it should not go — causing immediate shorts that can permanently damage the motherboard, and sometimes other components connected to it.
How It Works
Four simple steps from part list to finished machine.
1
Design Your Build
Head to PCPartPicker.com and select your components. Make sure the compatibility checker shows no errors before moving on.
2
Submit Your Parts List
Copy the unique URL of your saved PCPartPicker build and paste it into the quote form below along with your contact details.
3
Get a Quote
We review your build, double-check compatibility, and send you a quote for professional assembly and Windows installation. Typically $150–$250 depending on complexity.
4
Drop Off & Pick Up
Order your parts to your home, bring them into our shop, and we’ll have your fully stress-tested, cable-managed PC ready in 2–3 business days.
Request a Build Quote
Fill out the form below and we will review your parts list and get back to you with a quote.
Into the hobby but don’t want to risk the build?
You picked the parts. You know the difference between DDR5 and DDR4. You’ve watched the build videos. You just don’t want a bent pin or a wrong front panel header turning a $2,000 build into a paperweight. That’s exactly who this service is for.
Assembly quotes only. Please ensure your PCPartPicker list is set to public before submitting — we cannot access private lists.
We will review your build for compatibility and follow up with a quote by phone or email.
Ready to Get Started?
Have questions before submitting? Call 724-863-1989 or visit our Contact / Hours / Directions page.